1EG0
FITTING OF COMPONENTS WITH KNOWN STRUCTURE INTO AN 11.5 A CRYO-EM MAP OF THE E.COLI 70S RIBOSOME
ELECTRON MICROSCOPY
Data Collection
Overall | |||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
ID # | Resolution (High) | Resolution (Low) | Percent Possible (Observed) | Net I Over Average Sigma (I) | Redundancy | Number Reflections (All) | Number Reflections (Observed) | Observed Criterion Sigma (F) | Observed Criterion Sigma (I) | B (Isotropic) From Wilson Plot | |||||||||
1 | 11.5 |
Sample |
---|
E.COLI 70S RIBOSOME |
Specimen Preparation | |
---|---|
Sample Aggregation State | PARTICLE |
Vitrification Instrument | HOMEMADE PLUNGER |
Cryogen Name | ETHANE |
Sample Vitrification Details |
3D Reconstruction | |
---|---|
Reconstruction Method | SINGLE PARTICLE |
Number of Particles | 73523 |
Reported Resolution (Å) | 11.5 |
Resolution Method | |
Other Details | |
Refinement Type | |
Symmetry Type | POINT |
Point Symmetry | C1 |
Map-Model Fitting and Refinement | |||||
---|---|---|---|---|---|
Id | 1 | ||||
Refinement Space | RECIPROCAL | ||||
Refinement Protocol | RIGID BODY FIT | ||||
Refinement Target | VECTOR R-FACTOR | ||||
Overall B Value | |||||
Fitting Procedure | |||||
Details | REFINEMENT PROTOCOL--RIGID BODY REFINEMENT DETAILS--ALL COMPONENTS WERE FIT INTO MAP AS RIGID BODIES USING COORDINATES FROM THE REFERRED SOURCES EXCE ... |
Data Acquisition | |||||||||
---|---|---|---|---|---|---|---|---|---|
Detector Type | KODAK SO-163 FILM | ||||||||
Electron Dose (electrons/Å**2) | 10 |
Imaging Experiment | 1 |
---|---|
Date of Experiment | 1997-01-01 |
Temperature (Kelvin) | |
Microscope Model | FEI/PHILIPS CM200FEG/ST |
Minimum Defocus (nm) | 730 |
Maximum Defocus (nm) | 4340 |
Minimum Tilt Angle (degrees) | |
Maximum Tilt Angle (degrees) | |
Nominal CS | |
Imaging Mode | BRIGHT FIELD |
Specimen Holder Model | |
Nominal Magnification | 50000 |
Calibrated Magnification | |
Source | FIELD EMISSION GUN |
Acceleration Voltage (kV) | 200 |
Imaging Details |